|
|
|
Pedestal/Module/Top Cap:
- Physical Dimensions:
- (H) 10 inches / 17 inches / 4 inches x (W) 32 inches / 32 inches / 32 inches x (D) 26 inches / 22 inches / 22 inches)
- [(H) 25.4 cm / 43.2 cm / 10.1 cm x (W) 81.2 cm / 81.2 cm / 81.2 cm x (D) 66 cm / 55.9 cm / 55.8 cm)]
- Weight:
- Empty: 40 lb. / 50 lb. / 15lb. (18.2 kg / 22.7 kg / 6.8 kg)
- Full: 70 lb. / 130 lb. / 15 lb. (31.8 kg / 59 kg / 6.8 kg)
System Capacity:
- Expandable up to 16,000 Ports
Memory:
- Redundant CP PII Call Processors:
- Flash not required
- 128 MB DRAM for five network groups or less; 256 MB DRAM six network groups or greater
- For Redundant Motorola 68060E Call Processors (Scalable):
- Flash 32-64 MB
- DRAM 64-96 MB
Call Processor:
- Redundant CP PII (standard for new systems).
- Upgrades to CP PII available for installed base systems
Mass Storage Media:
- Redundant Multi Media Disk Units
- Each with one 2 MB floppy disk drive and one 20 GB hard disk drive with CD-ROM.
I/O Ports:
Switching Networks (Traffic CCS is at P.01 Grade of Service):
- 256 loops; 288,000 total CCS (or 224 loops
- 240,000 total CCS (excluding service circuits)
Busy-Hour Call Completions:
- 320,000 BHCC.
- Note: BHCC ratings are nominal; actual capacity is dependent on software release, site configuration, and peripheral type.
Integrated Data Switching Capacity:
- V.90 supported with up to 53 kbps asynchronous downstream and 33.6 kbps upstream using analog message waiting line card.
- up to 64 kbps synchronous
Trunking:
- Analog:
- Loop or Ground Start CO, FX, WATS, 2 or 4 wire E&M or 4-wire DX, DID, TIE, RAN, Paging
- Digital:
- DTI, ISDN-PRI, ISDN-BRI, ITG 2.1 Trunk
Compatibility:
- Telephones:
- Meridian Digital:
- M3900 Series: M3901, M3902, M3903, M3904, M3905
- M2000 Series: M2006, M2008, M2008HF, M2616, M2216ACD, M2016S Secure
- Internet Protocol:
- IP Phone 2004
- IP Softphone 2050
- Analog: Series 500/2500 type
- Attendant Services:
- Meridian 1 Attendant PC
- Meridian 2250 Attendant Console
- Central Answering Position (CAP)
- Internet Telephone Gateways:
- Meridian 1 Internet Telephony Gateways (ITG)
- ITG Trunk 2.1: 32 ports; supports ISDN Q.Sig and Meridian Customer Defined Networking (MCDN). Codecs supported include G.711, G729AB, G723.1. Signaling via H.323 version 2.0.
- ITG Line 3.0: 32 ports; Supports up to 128 IP Phone 2004/Softphone 2050 phones per card. Codecs supported include G.711, G.729B, G.729AB.
- 802.11 Wireless IP Gateway: 24 ports supporting up to 24 wireless IP handsets per card. X11 Release 25.30 and later software required. Codecs supported include G.711 and G.729A. 10/100 Base-T connection to Telephony LAN from Gateway; 10 Base-T connection to Equipment LAN
- Internet Telephones:
- IP Phone 2004 (10/100 Base-T Auto Sensing; RJ-45 Connection): DHCP Compatible; Supports G.711, G.729A - Annex B Codecs.
- Internet Telephone Switch Module: IEEE 802.3,802.3u,802.3x standards supported. 10/100 Base-T Auto sensing, 48v DC Power Supply.
- IP Softphone 2050: supported on Microsoft Windows (c) 98, Windows 2000
Network Management - Optivity Telephony Manager:
- Windows NT or 2000 server/professional
- Web management support with Netscape Navigator 4.5 or MS Internet Explorer 5.x; HPOpenView and Optivity NMS integration
- Supports up to 128,000 sets
- Up to 2.5 million call records per costing configuration
- Alarm queue can hold up to 1,360 traps (3.7 hours worth of alarms from Meridian 1.
Power Requirements:
- Input Voltage:
- AC: 180 to 280V, 50/60 Hz
- DC: -40 to -56.6V
- Power Consumption and Heat Dissipation:
| Module |
Power (watts) |
Heat (BTU/hr) |
|
Core Network:
|
360 |
1230 |
| Network Module: |
270 |
820 |
| Intelligent Peripheral Equipment Module: |
460 |
1160 |
| Meridian Mail Module: |
240 |
820 |
| Application Equipment Module (single): |
140 |
480 |
| Application Equipment Module (dual): |
190 |
650 |
| Intergroup Module: |
0 |
0 |
| Pedestal: |
50 |
170 |
Environmental Specifications:
- Ambient Temperature:
- Recommended: 15-30 degrees Celsius (59-86 degrees Fahrenheit)
- Absolute: 10-45 degrees Celsius (50-113 degrees Fahrenheit)
- Relative Humidity % without Condensation:
- Recommended: 20%-55%
- Absolute: 20%-80% temperature change less than 10 degrees Celsius (50 degrees Fahrenheit) per hour
|
|
